1. Home
  2. install guide
  3. IPTV install in ENIGMA2 receivers | XTREAMCODE PLUGIN

IPTV install in ENIGMA2 receivers | XTREAMCODE PLUGIN

To install it inside a box you can login with telnet or ssh. The command to install is opkg install httplink


opkg install http://example.com:8000/enigma2/XtreamTV_0.0.1_armv7a.ipk
opkg install http://example.com:8000/enigma2/XtreamTV_0.0.1_mips32el.ipk
opkg install http://example.com:8000/enigma2/XtreamTV_0.0.1_mipsel.ipk
opkg install http://example.com:8000/enigma2/XtreamTV_0.0.1_sh4.ipk

Information about which you version you need to install on boxes:

Mips32el is used for the most boxes. Example VU zero, Vu Duo, Zgemma and mostly above openpli 4 boxes or new images.
Mipsel is used for old boxes dm800 clones with old openpli 2.1
sh4 is used for boxes like spark
armv7a is used by new boxes like vu 4k and gigablue sf4008

So most used and strongly suggested is using the mips32el.

When u have it installed the plugin should appear in the menu called XtreamTV, open this and there will be an MAC written. You have to send us this MAC address, after that we can verify and activate the box.

If you want to remove the plugin from the box, u can write

opkg remove XtreamTV

its also possible to install again after this command.

Updated on June 24, 2019

Was this article helpful?

Related Articles